JH-204 Solvent-Free Antistatic Epoxy Primer

 

Loose particles and paint residue on the surface must be completely cleaned, breaks and cracks must be repaired, and the surfaces must be mechanically roughened (blastrak or milling machine) and dust must be removed with a vacuum cleaner.

Compounds A and B must be mixed using a low-speed mixer for at least 3-4 minutes until a homogeneous mixture is achieved, observing the mixing ratios. The mixture is ready for application. For a homogeneous mixture, the product temperature must not be less than +15°C.

Surfaces must have sufficient strength. The concrete must have a compressive strength of at least 25 N/mm² and a tensile strength of at least 1.5 N/mm². The surface must be clean, smooth, and dry, with a humidity not exceeding 5%. The relative humidity of the air must not exceed 90%, and the air and surface temperatures must be between +5°C and +35°C during application. The product must be fully cured before applying the top coat. Mixing ratios must be observed. For surfaces with a moisture content exceeding 4%, JH-209 epoxy primer should be preferred. Recommended products for use on this product: Solvent-free Epoxy Coatings and Paints, Polyurethane Coatings, Paints, and Waterproofing Coatings.

The product is for professional use. Before use, pay attention to the safety warnings on the packaging and, if necessary, refer to the product's Material Safety Data Sheet. Do not inhale, avoid contact with skin and eyes, do not swallow, and use appropriate work safety equipment. Take the necessary precautions to prevent fire and explosion hazards and environmental contamination. Apply in well-ventilated areas.

The product should be stored between +5ºC and +35ºC. The product should not be exposed to direct sunlight. Once opened, store the product in its original packaging with the lid tightly closed.