JH-2114 Binder

In molded production, rubber granules and binder are mixed, placed in molds, and then pressed. These molded pieces, shaped like keystones, are then assembled and coated in the desired area.

The application surface must be smooth, dry, and clean. It must be free of mineral oil, dirt, rust, and burrs. No foreign materials should be added. If the ambient and surface temperature is below +10°C or above +30°C, the appropriate temperatures must be waited for during application. Concrete moisture content should not exceed 4%, and the ambient humidity should be at least 40% and at most 80%. It is recommended that application not begin before waiting for the appropriate humidity levels.

Avoid skin contact with the product. If swallowed, consult a physician who can determine whether gastric lavage is necessary. Wearing protective eyewear and gloves is recommended.