JH-810 Flexible Polyurethane Waterproofing Material

• When applied, it creates a single-piece seal that eliminates any joints or the possibility of leakage.
• Because it is a pure polyurethane, it can be in constant contact with water.
• It maintains its mechanical properties at temperatures between 30°C and +90°C.
• It seals cracks up to 2 mm thick, even at 10°C.
• It provides water vapor permeability. It adheres completely to the surface without requiring any additional bonding.
• The waterproofed surface can be walked on.
• Even if the waterproofing material is damaged, the damaged area can be easily repaired in a few minutes.
• It is resistant to plant roots.
• Because the product has antibacterial properties, it prevents bacteria from growing on the product.
• It has good resistance to acidic and alkaline solutions (10%), detergents, seawater, oils, and lubricants.

Color..................................White-Gray-Blue-Cream-Transparent

Gloss...................Glossy or Matt (optional)

Binding agent..................Polyurethane Resin

Density..............................Base material 1.25 / Hardener 1.22 g/ml

Mixing ratio..................4/1 kg by weight

Application process...............45 minutes at -2 oC/+25 oC

Hardening start...........45 minutes at 25 oC/+40 oC

Heat resistance....................-40 oC/+220 oC

Drying time.......................2 hours (full cure 48 hours)

Environmental compatibility..............................No adverse environmental impact

Health compatibility...............Not harmful to health.

Flexural Strength..............45 kg/cm2 (DIN 53452)

Tensile Strength.............30 kg/cm2 (DIN 53455)

UV.........................................Resistant.

Jehoel JH-810 Polyurethane Waterproofing Material: Mix the base material (4 parts) and the hardener (1 part) together for a maximum of 3-4 minutes using a clean stick or electric mixer. Application can be done with a brush, roller, airless spray, or trowel, as desired. Application should be completed within 35 minutes in hot environments (summer) above 25°C and within 50 minutes in cold environments (winter). If used on walls or water tanks, apply to the plaster after removing any existing paint or other materials that could be eroded. The surface should not be wet, walked on, or protected for 24 hours.

The product is for professional use. Before use, pay attention to the safety warnings on the packaging and, if necessary, refer to the product's Material Safety Data Sheet. Do not inhale, avoid contact with skin and eyes, do not swallow, and use appropriate work safety equipment. Take the necessary precautions to prevent fire and explosion hazards and environmental contamination. Apply in well-ventilated areas.

The product should be stored between +5ºC and +35ºC. The product should not be exposed to direct sunlight. Once opened, store the product in its original packaging with the lid tightly closed.