JH-911 Heat Shield

It is an acrylic copolymer resin based, water-based, single-component, ready-to-use, elastic, spread-based thermal insulation coating material that can be easily applied to all types of surfaces and can be painted on.

DescriptionAcrylic copolymer resin based water based single component FIRE RETERDANT COATINGS Complies with the description. Elasticity 300% Density 1.60 g/ml Application Tools Roller-Brush-Trowel-Airless Machine Application Surface Temperature +5C - +35C Adhesion Strength 15 kgf/cm2 Drying Time First dry 12 hours Second coat 24 hours (Full dry 72 hours) Physical and Chemical resistance Starts 7 days after application. Flame Retardant does not emit toxic gases. Health Compliance It is not harmful to health after complete drying. UV resistant. Flash Point It does not flash.

Loose particles and paint residue on the surface must be completely cleaned, and any cracks and breaks must be repaired.

Surfaces must have sufficient strength. The surface must be clean and smooth.

A coat of heat shield primer must be applied. The first coat of JH-911 Heat Shield can be applied at two-hour intervals. The second coat of JH-911 Heat Shield can be applied one day later.

The surface can be painted in the desired color one day after the application.

The product is for professional use. Before use, pay attention to the safety warnings on the packaging and, if necessary, refer to the product's Material Safety Data Sheet. Do not inhale, avoid contact with skin and eyes, do not swallow, and use appropriate work safety equipment. Take the necessary precautions to prevent fire and explosion hazards and environmental contamination. Apply in well-ventilated areas.

The product should be stored between +5ºC and +35ºC. The product should not be exposed to direct sunlight. Once opened, store the product in its original packaging with the lid tightly closed.